Description
- Connecting the power, the default setting is high voltage protection voltage 270V, low voltage protection voltage
- 170V and working delay-time 10 seconds.
- 2. Press the SET key to enter the high-voltage setting page, the digital is flashing, press the + or – key to adjust the high voltage protection range.
- Press the SET key again, and it enters the next low voltage value setting, the digital is flashing again, so press the + or – key to adjust the low voltage protection range.
- Press the SET key again, and the page is entered the delay-time setting, press the + or – key to adjust the delay time after the power
- is recovery.
- Press the SET again to confirm all data are OK finally.
- 3. When the applied voltage is in the normal working range, the blue light will be ON;
- When the product is in the protection state of too high or too low voltage, the red light will be ON and the power will be cut off automatically;
- When the product is powered off because the instantaneous voltage is too high or too low, delay protection will be opened automatically, and no power output.
- 4. After the delay-time countdown off, the product to be resume working.
- Noted: The reset voltage is automatically detected at a set value below or above 10V.
- ·High-voltage protection: 10V below the original settings recovery;
- ·Low-voltage protection: 10V above the original settings recovery.
Reviews
There are no reviews yet.